دکتر علی بیت اللهی، استاد
نانومواد
سرامیکهای مهندسی
سرامیکهای الکتریکی – مغناطیسی
نانومواد
سرامیکهای مهندسی
سرامیکهای الکتریکی – مغناطیسی
دکتری:انگلستان، دانشگاه بیرمنگام |
مقالات چاپ شده در مجلات علمی – لاتین |
Mazinani, B., Beitollahi, A., Masrom, A.K., Samiee, L., Ahmadi, Z., “Synthesis and photocatalytic performance of hollow sphere particles of SiO۲-TiO۲ composite of mesocellular foam walls”, Ceramics International, Volume 43, Issue 15, 15 October 2017, Pages 11786-11791 |
Ghasemi, S., Farsangi, Z.J., Beitollahi, A., Mirkazemi, M., Rezayat, S.M., Sarkar, S., “Synthesis of hollow mesoporous silica (HMS) nanoparticles as a candidate for sulfasalazine drug loading”, Ceramics International, Volume 43, Issue 14, 1 October 2017, Pages 11225-11232 |
Mirtaheri, B., Shokouhimehr, M., Beitollahi, A., “Synthesis of mesoporous tungsten oxide by template-assisted sol–gel method and its photocatalytic degradation activity”, Journal of Sol-Gel Science and Technology, Volume 82, Issue 1, 1 April 2017, Pages 148-156 |
Behzad Abasht, Seyyed Mohammad Mirkazemi, Ali Beitollahi, “Solution combustion synthesis of Ca hexaferrite using glycine fuel”, Volume 708, ۲۵ June 2017, Pages 337–۳۴۳ |
Jafari, S., Beitollahi, A., Eftekhari Yekta, B., Ohkubo, T., Budinsky, V., Marsilius, M., Mollazadeh, S., Herzer, G., Hono, K., “Three-dimensional atom probe analysis and magnetic properties of Fe۸۵Cu۱Si۲B۸P۴ melt spun ribbons”, Journal of Magnetism and Magnetic Materials, Volume 401, 1 March 2016, Pages 1123-1129 |
Abbasi, O., Ghanbari, A., Asghar Hosseini, S.A., Beitollahi, A., “Analytical solution for predominant natural frequency of retaining wall with effect of flexible base”, International Journal of Geotechnical Engineering , Volume 10, Issue 3, 26 May 2016, Pages 257-262 |
Behzad Abasht, Ali Beitollahi, Seyyed Mohammad Mirkazemi, “Processing, structure and magnetic properties correlation in co-precipitated Ca-ferrite”, Journal of Magnetism and Magnetic Materials, Volume 420, ۱۵ December 2016, Pages 263–۲۶۸ |
Z. Jomeh Farsangi, A. Beitollahi, B. D. Hatton, S. Sarkar, M. R. Jaafari, M. Rezayat, A. Amani and F. Gheybia, “One-pot controllable synthesis of carboxylic group functionalized hollow mesoporous silica nanospheres for efficient cisplatin delivery”, RSC Advances, 2016 |
Mashhadban, H., Beitollahi, A., Kutanaei, S.S., “Identification of soil properties based on accelerometer records and comparison with other methods”, Arabian Journal of Geosciences, Volume 9, Issue 6, 1 May 2016, Article number ۴۲۷ |
Mahdi Maleki ,Mohammadreza Shokouhimehr, Hossein Karimian, Ali Beitollahi, “Three-dimensionally Interconnected Porous Boron Nitride Foam Derived From Polymeric Foams”, RSC Advances, Volume 6, Issue 56, 2016, Pages 51426-51434 |
S. Jafari, A. Beitollahi, B. Eftekhari Yekta, T. Ohkubo, Viktoria Budinsky, Mie Marsilius, Giselher Herzer, K. Hono, “Atom probe analysis and magnetic properties of nanocrystalline Fe84.3Si4B8P3Cu0.7”, Journal of Alloys and Compounds, 674, 2016, 136-144 |
FarzadHosseini-Nasab, MohammadMahdiTavakoli, AliBeitollahi, Mohammad KazemMoravvej-Farshi, “Kinetics of crystallization in FeB based nanocrystalline soft magnetic alloys”, Journal of MagnetismandMagneticMaterials407(2016)13–۱۶ |
A. Beitollahi, M. Sharif Sheikhaleslami, “A novel approach for development of graphene structure in mesoporous carbon of high specific surface area”, Carbon 107, 2016, 440-447 |
Mahdi Maleki, Ali Beitollahi, Mohamadreza Shokohimehr, “Template Free Synthesis of Porous Boron Nitride Using a Single Source Precursor”, RSC Advances, 2015 |
Ali Beitollahi, Mohammadreza Shokouhimehr, “Simple Synthesis of Two-dimensional Micro/Mesoporous Boron Nitride, Eur. J. Inorg. Chem. ۲۰۱۵, ۲۴۷۸–۲۴۸۵ |
L. Samiee, A. Beitollahi, “Critical effect of sol ageing conditions on thermal stability and organization of titania mesoporous powder”, Res Chem Intermed DOI 10.1007/s11164-013-1329-3 |
M. Bagheri, M.A. Bahrevar, A. Beitollahiو “Synthesis of mesoporous magnesium ferrite (MgFe2O4) using porous silica templates”, ceramics International |
Mahdi Maleki, Ali Beitollahi, Jafar Javadpour,Noorhana Yahya, “Dual Templates route for the synthesis of hierarchical porous boron nitride”, Ceramics International 41, 2015, 3806-3813 |
M Maleki, A Beitollahi, J Lee, M Shokouhimehr, J Javadpour, “One pot synthesis of mesoporous boron nitride using polystyrene-b-poly (ethylene oxide) block copolymer” EJ Park, RSC Advances 5 (9), 6528-6535 (2015) |
Photocatalytic activity, surface area and phase modification of mesoporous SiO 2–TiO 2 prepared by a one-step hydrothermal procedure (۲۰۱۵) B Mazinani, AK Masrom, A Beitollahi, R Luque Ceramics International 40 (8), 11525-11532 |
FarzadHosseini-Nasb, AliBeitollahi, MohammadKazemMoravvej-Farshi, “Effect of crystallizationon softmagnetic properties of nanocrystalline Fe80B10Si8Nb1Cu1 alloy “, Journal of Magnetism and Magnetic Materials 373 (2015) 255–۲۵۸ |
M Maleki, A Beitollahi, J Javadpour, N Yahya , “ Dual template route for the synthesis of hierarchical porous boron nitride”, Ceramics International (2014) |
N Najmoddin, A Beitollahi, E Devlin, H Kavas, SM Mohseni, J Åkerman, “Magnetic properties of crystalline mesoporous Zn-substituted copper ferrite synthesized under nanoconfinement in silica matrix “, Microporous and Mesoporous Materials 190, 346-355 (2014) |
Farzad Hosseini-Nasb, Ali Beitollahi, Mohammad Kazem Moravvej-Farshi, ” The effect of quenching rate on structure and soft magnetic properties of high Bs Fe-based nanocrystalline alloys “,Advanced Materials Research 01/2014; 829:78-81. |
S. Jafari, A. Beitollahi, B. EftekhariYekta, Keiu Kanada, T. Ohkubo, R. Gopalan, Giselher Herzer, K. Hono, ” Microstructural and magnetic properties study of Fe–P rolled sheet alloys”, Journal of Magnetism and Magnetic Materials 01/2014; s 358–۳۵۹:۳۸–۴۳. · ۱.۸۳ Impact Factor |
Najmeh Najmoddin, Ali Beitollahi, Eamonn Devlin, Hüseyin Kavas, Seyed Majid Mohseni, Johan Åkerman, Dimitris Niarchos, Hamidreza Rezaie, Mamoun Muhammed, Muhammet S. Toprak, ” Magnetic properties of crystalline mesoporous Zn-substituted copper ferrite synthesized under nanoconfinement in silica matrix “, Microporous and Mesoporous Materials 01/2014; 190:346–۳۵۵. · ۳.۳۷ Impact Factor |
Najmeh Najmoddin, Ali Beitollahi, Mamoun Muhammed, Narges Ansari, Eamonn Devlin, Seyed Majid Mohseni, Hamidreza Rezaie, Dimitris Niarchos, Johan Åkerman, Muhammet S. Toprak, ” Effect of nanoconfinement on the formation, structural transition and magnetic behavior of mesoporous copper ferrite “,Journal of Alloys and Compounds 01/2014; 598:191–۱۹۷. · ۲.۳۹ Impact Factor |
Leila Samiee, Ali Beitollahi, ” Critical effect of sol ageing conditions on thermal stability and organization of titania mesoporous powder “, Research on Chemical Intermediates 07/2013; · ۰.۸۸ Impact Factor. |
Sajad Sohrabi, Hossein Arabi, Ali Beitollahi, Reza Gholamipour, ” Planar Flow Casting of Fe71Si13.5B9Nb3Cu1Al1.5Ge1 Ribbons “, Journal of Materials Engineering and Performance 02/2013; · ۰.۹۲ Impact Factor |
B. Mazinani, A. Beitollahi, A. K. Masrom, S. Ibrahim, F. Jamil, ” The effect of aging temperature on the pores of mesoporous SBA-15 silica “2012 |
Beitollahi, A., Daie, A.H.H., Samie, L., Akbarnejad, M.M., “Synthesis and characterization of mesoporous TiO2 assembled as microspheres”, Journal of Alloys and Compounds ۴۹۰ (۱-۲), pp. 311-317 |
Beitollahi, A., Hosseini-Bay, H., Sarpoolaki, H., “Synthesis and characterization of Al2O3-ZrO 2 nanocomposite powder by sucrose process”, Journal of Materials Science: Materials in Electronics 21 (2), pp. 130-136 |
Amirahmadi, Z., Marghussian, V.K., Beitollahi, A., Mirkazemi, S.M., Sarpoolaky, “Magnetite nanoparticles prepared by the crystallization of Na 2O-Fe2O3-B2O3-SiO 2 glasses, Journal of Non-Crystalline Solids“, ۳۵۷ (۱۶-۱۷), pp. 3195-3199, 2011. |
Samie, L., Beitollahi, A., Faal-Nazari, N., Akbar Nejad, M.M., Vinu, A. “Effect of humidity treatment on the structure and photocatalytic properties of titania mesoporous powder”, Journal of Materials Science: Materials in Electronics 22 (3), pp. 273-280, 2011. |
Oveisi, H., Jiang, X., Nemoto, Y., Beitollahi, A., Yamauchi, Y. “Cerium-doped mesoporous TiO2 thin films: Controlled crystallization of anatase with retention of highly ordered mesostructure”, Microporous and Mesoporous Materials, ۱۳۹ (۱-۳), pp. 38-44, 2011. |
Beitollahi, A., Golpayegani, H., Niyaeifar, M. “Phase evolution and magnetic properties study of Fe/Cobalt ferrite nanocomposites” Journal of Materials Science: Materials in Electronics 22 (2), pp. 124-129, 2011. |
Oveisi, H., Anand, C., Mano, A., Al-Deyab, S.S., Kalita, P., Beitollahi, A., Vinu, A.” Inclusion of size controlled gallium oxide nanoparticles into highly ordered 3D mesoporous silica with tunable pore diameters and their unusual catalytic performance”, Journal of Materials Chemistry ۲۰ (۴۵), pp. 10120-10129, 2010. |
Yogamalar, R., Mahendran, V., Srinivasan, R., Beitollahi, A., Kumar, R.P., Bose, A.C., Vinu, A.” Gas-sensing properties of needle-shaped Ni-doped SnO2 nanocrystals prepared by a simple sol-gel chemical precipitation method”, Chemistry – An Asian Journal ۵ (۱۱), pp. 2379-2385, 2010. |
Oveisi, H., Suzuki, N., Beitollahi, A., Yamauchi, Y., “Aerosol-assisted fabrication of mesoporous titania spheres with crystallized anatase structures and investigation of their photocatalitic properties”, Journal of Sol-Gel Science and Technology ۵۶ (۲), pp. 212-218, 2010. |
Samiee, L., Beitollahi, A., Bahmani, M., Akbarnejad, M.M., Vinu, A. “Effects of ageing conditions and block copolymer concentration on the stability and micellization of P123-Ti4+ sols prepared by the templating method”, Research on Chemical Intermediates ۳۶ (۸), pp. 897-923, 2010. |
Oveisi, H., Beitollahi, A., Imura, M., Wu, C.-W., Yamauchi, Y., “Synthesis and characterization of highly ordered titania-alumina mixed oxide mesoporous films with high alumina content”, Microporous and Mesoporous Materials ۱۳۴ (۱-۳), pp. 150-156, 2010. |
Anand, C., Sathyaseelan, B., Samie, L., Beitollahi, A., Pradeep Kumar, R., Palanichamy, M., Murugesan, Vinu, A., “Friedel-Crafts benzylation of benzene and other aromatics using 3D mesoporous gallosilicate with cage type porous structure”, Microporous and Mesoporous Materials ۱۳۴ (۱-۳), pp. 87-92, 2010. |
Oveisi, H., Suzuki, N., Nemoto, Y., Srinivasu, P., Beitollahi, A., Yamauchi, Y., “Critical effect of aging condition on mesostructural ordering in mesoporous titania thin film”, Thin Solid Films ۵۱۸ (۲۳), pp. 6714-6719, 2010. |
Oveisi, H., Rahighi, S., Jiang, X., Nemoto, Y., Beitollahi, A., Wakatsuki, S., Yamauchi, Y. “Unusual antibacterial property of mesoporous titania films: Drastic improvement by controlling surface area and crystallinity”, Chemistry – An Asian Journal ۵ (۹), pp. 1978-1983, 2010. |
Golezardi, S., Marghussian, V.K., Beitollahi, A., Mirkazemi, S.M. “Crystallization behavior, microstructure and dielectric properties of lead titanate glass ceramics in the presence of Bi2O3 as a nucleating agent”, Journal of the European Ceramic Society ۳۰ (۶), pp. 1453-1460, 2010. |
Niyaifar, M., Beitollahi, A., Shiri, N., Mozaffari, M., Amighian, J., “Effect of indium addition on the structure and magnetic properties of YIG”, Journal of Magnetism and Magnetic Materials ۳۲۲ (۷), pp. 777-779, 2010. |
Gharehaghaji, N., Oghabian, M.A., Sarkar, S., Darki, F., Beitollahi, A., “How size evaluation of lymph node is protocol dependent in MRI when using ultrasmall superparamagnetic iron oxide nanoparticles”, Journal of Magnetism and Magnetic Materials 321 (10), pp. 1563-1565, 2009. |
Sarkar, S., Beitollahi, A. “An overview on nanotechnology activities in Iran”, Iranian Journal of Public Health 38 (SUPPL. 1), pp. 65-68, 2009. |
Biazar, E., Beitollahi, A., Rezayat, S.M., Forati, T., Asefnejad, A., Rahimi, M., Zeinali, Heidari, M., “Effect of the mechanical activation on size reduction of crystalline acetaminophen drug particles”, International journal of nanomedicine 4, pp. 283-287, 2009. |
A. Beitollahi, H. Hosseini-bay, H. Sarpoolaki, “Synthesis and characterization of Al2O3-ZrO2 nanocomposite powder by sucrose process” j. of materials science.mater electron, 2009 |
R. Sani, A. Beitollahi, ” Phase evolution and magnetic properties of Co/a/Fe۲O۳ powder mixtures with different molar ratio treated by mechanical alloying”, Journal of Non-Crystalline Solids, 2008 |
N. Gharehaghaji, M.A. Oghabian, S. Sarkar, F. Darki, A. Beitollahi, ” How size evaluation of lymph node is protocol dependent in MRI when using ultrasmall superparamagnetic iron oxide nanoparticles”, Journal of Magnetism and Magnetic Materials, 2009 |
F. Shahri, A. Beitollahi, S.G. Shabestari, 6 others, “Stuructural characterization and magnetoimpedeance effect in amorphous and nanocrystalline Al-Ge substituted FeSiBNbCu ribbons”, Journal of Magnetism and Magnetic Materials (312), 2007, pp. 35-42 |
R. Sani, A. Beitollahi, Yu.V. maksimur, I.P. suzdalev, “Synthesis, phase formation study and magnetic properties of CoFe۲O۴ nanopowder prepared by mechanical milling”, Journal of Material Science, 2007 |
B. Alinejad, H. Sarpoolaky, A. Beitollahi, A. Saberi, Sh. Afshar, “Synthesis and characterization of nanocrystalline MgAl۲O۴ spinel via sucrose process”, Materials Research Bulletin, 2007 |
F. Shahri, A. Beitollahi, “Effect of superheat treatment and quenching wheel speed on the structure and magnetic properties of Fe-Si-Nb-Cu-B-Al-Ge melt spun ribbons”, Journal of Non-Crystalline Solids, 2007 |
R. Gholamipour, A. Beitollahi, V.K. Marghussian, T. Ohkubo, “Cu effect on coercivity and microstructural features in nanocrystalline Nd-Fe-Co-B annealed melt-spun ribbons”, Physica B 398, 2007, pp. 51-54 |
F. Shahri, A. Beitollahi, S. Shabestari, 6 author, “Structural characterization and magneto impedance effect in amorphous and nanocrystalline AlGe-substituted FeSiBNbCu ribbons”, Journal of Magnetism and Magnetic Materials, 2006 |
A. Beitollahi, R. Gholamipour, V.K. Marghussian, 7 other author, “Magnetic and structural properties of rapidly quenched Nd-Fe-Co-Ge-B alloys”, The physics of Metals and Metallography, No. 102, 2006, pp. 24-31 |
A. Beitollahi, S.M. Bafghi, S.M.A. Jazayeri, H. Ghanbari, “Synthesis and Characterization of nm-sized PbTiO۳ crystallites”, Journal of Material Science, 2006 |
A. Beitollahi, M. Abedini, “Effect of the level of the addition of Pb(Y۰.۵Nb۰.۵)O۳ on the structure, microstructure and ferroelectric properties of PZT (53/47)”, Journal of Materials Science, 2006 |
M. Mirkazemi, V.K. Marghussian, A. Beitollahi, “Crystallisation behaviour, microstructure and magnetic properties of BaO-Fe۲O۳-B۲O۳-SiO۲ glass ceramics”, Ceramics Int., No.32, 2006, pp.43-51 |
R. Gholamipour, A. Beitollahi, V.K. Marghussian, “Microstructure – magnetic properties relationships in nanocrystalline Nd-Fe-Co-Ge-B annealed ribbons”, Phys. Stat. Sol (a), 2006 |
V.K. Marghusian, A. Beitollahi, M. Haghi, “The effect of SiO۲ and Cr۲O۳ additions on the crystallization behaviour and magnetic properties of a B۲O۳-BaO-Fe۲O۳ glass”, Ceramics International, 2003, pp. 455-462 |
مقالات ارائه شده در مجامع علمی – لاتین |
S. Mirzaei, A. Beitollahi, S.G. Shabestari, F. Shahri, ” Effect of heat treatment on the GMI effect and Domain structures of amorfous and nanocrystalline soft magnetic Fe۷۲Si۱۲.۵B۹Nb۳ Cu1Al۱.۵Ge1 alloy”, 2nd International Congress on Nanotech, ( ICNN2008),2008 |
A. Beitollahi, “A glance ” size effect” in magnetic materials”, Iran-India Joint Conference in Nano-technology, 2008 |
L. Samiee, A. Beitollahi, M.M. Akbarnejad, “Evaluation of synthetic procedure of titania mesoporous powder from initial solution”, Nano Hybrid Conference, 2008 |
L. Samiee, A. Beiollahi, M.M. Akbarnejad, N. Faalnazari, “Effect of sol treatment on the TiO2 mesostructure prepared by copolymer tempelating”, Nano Hybrid Conference, 2008 |
H. Golpayegani, A. Beitollahi, “Synthesis and magnetic properties of CoFe2O4 nano powder prepared by mechanical milling”, 2nd International Congress on Nanoscience and Nanotechnology, 2008 |
F. Shahri, A. Beitollahi, S.G. Shabestari, “Effect of processing parameters and additives on magnetic, microstructure and kinetic of nanocrystallization of Fe-Si-B-Nb-Cu alloy”, ۳th student Conference of Nanotechnology, Shiraz, 2007 |
A. Beitoollahi, F. Shahri, S.G. Shabestari, S. Kamali, “Effect of heat-treatment on the structure and magnetic properties of Al-Ge-added FINEMENT alloys”, Knowledge Based Industries & Nanotechnology Conference, 2007 |
A. Beitollahi, R. Sani, Y. Manximof, P. Suzdalev, “Structural and magnetic properties study of CoFe۲O۴ nanopowder prepared by mechanical milling using metallic cobalt and hematite powder blend”, Nanotech, 2006 |
B. Alinejad, H. Sarpoolaky, A. Beitollahi, S. Afshar, ”The low temperature synthesis of nanocrystalline MgAl۲O۴ spinel via sucrose process”, First International Congress on Nanoscience and Nanotechnology, Tehran University, 2006 |
A. Beitollahi, S.A.M. Haghgo, “Synthesis and characterization of ceria nanopowder by solution combustion method”, Nano, India-Bangalore, 2006 |
A. Beitollahi, F. Shahri, S.G. Shabestari, “Structural and magnetic properties relationship in amorphous and nanocrystalline Al-Ge substituted FeSiBNbCu ribbons”, Nano, India-Bangalore, 2006 |
A. Beitollahi, R. Gholamipour, V.K. Marghussian, T. Ohkubo, K. Hono, “Near atomic scale analysis of nanocrystalline NdFeCoMb (M = Ga, Ge) alloys: an improved understanding of microstructure-Magnetic properties relationship”, Nano, India-Bangalore, 2006 |
A. Beitollahi, S. Jafari, M.A. Oghabian, S. Sarkar, “Synthesis and characterization of Fe۳-xZnxO۴ (x = 0 and 0.2) Nanoparticles for medical applications”, Int. Conf. on Bio-Nanotechnology, 2006 |
S.M. Rezayat, S.M. Hosseinalipour, S.G. Ghamami, A. Khalilzadeh, E. Biazar, A. Beitollahi, “A Comparative study of liver toxicity effects of normal and reduced size (C100)”, Int. Conf. on Bio-Nanotechnology, 2006 |
Taherkhani, Mosadeghi, A. Beitollahi, Hosseinalipour, “Biocompatible coating superparamagnetic iron oxide nanoparticle for medical application”, Nanobiotechnology, 2006 |
Rezaei, Hosseinalipour, Ghamami, Khalizadeh, Biazar, beitollahi, “A comparative study of liver toxicity effects of normal and reduced size acetaminophen crystallites on rats”, Int. conf. on bio-nanotechnology, 2006 |
R. Shahkooei, A. Beitollahi, H. Sarpoolaki, H. Ahmadi, S. Sotudeh, “Synthesis of Al۲O۳-ZrO۲ nanocomposite powder by solution combustion synthesis method”, ۱st Iran-Russia, 2005 |
H. Hosseinibay, A. Beitollahi, H. Sarpoolaki, H. Ahmadi, S. Sotudeh, “Synthesis of Al۲O۳-ZrO۲ nanocomposite powder by a modified sol-gel process”, ۱st Iran-Russia, 2005 |
R. Gholamipour, A. Beitollahi, T. Ohkubo, V.K. Marghussian, K. Hono, “Effect of Ge addition on the magnetic properties and microstructure of nanocrystalline Nd-Fe-Co-B annealed ribbons”, ۱st Iran-Russia, Russia, 2005 |
N. Kudrevatykh, S. Andrerv, A. Beitollahi, V.K. Marghussian, “Structural and magnetic properties of rapidly quenched Nd-Fe-Co-Ge-B and Y-Fe-B alloys of 2-14-1 phase compositions”, ۱st Iran-Russia, 2005 |
R. Gholamipour, A. Beitollahi, T. Ohkubo, V.K. Marghussian, K. Hono, “Microstructural study of Nd-Fe-Co-M-B (M=Ga, Ge) nanocrystalline ribbons and its relation to coerdirity”, ۱st Iran-Russia, Russia, 2005 |
R. Sani, A. Beitollahi, Yu. V. Maksimov, I.P. Suzdalev, M.Sh. Bafghi, “Synthesis and characterization of CoFe۲O۴ nanoparticles prepared by high energy milling”, ۱st Iran-Russia, 2005 |
F. Shahri, S.E. Roozmeh, S.M. Mohseni, A. Beitollahi, S.G. Shabestari, “Structural, magnetic properties and MI effect in amorphous and nanocrystalline AlGe-Substituted FeSiBNbCu ribbons”, ۱st Iran-Russia, 2005 |
A. Beitollahi, M. Moravej, “Phase formation study of PZT nanopowder by mechanical activation method at various conditions”, INCOME, 2003 |
مقالات ارائه شده در مجامع علمی – فارسی |
میرزایی، شهری، بیت اللهی، شبستری،” تأثیر عملیات حرارتی بر ریزساختار و خواص مغناطیسی آلیاژ نانوبلور نرم مغناطیس Fe۷۲Si۱۲.۵B۹Nb۳ Cu1Al۱.۵Ge1″، نهمین سمینار ملی مهندسی سطح و عملیات حرارتی،۱۳۸۷ |
میرزایی، بیت اللهی، شبستری، شهری، ” تأثیر عملیات حرارتی بر خواص مغناطیسی و ساختار سامانه های مغناطیسی آلیاژ نانوکریستالین نرم مغناطیس Fe۷۲Si۱۲.۵B۹Nb۳ Cu1Al۱.۵Ge1″، همایش ملی مهندسی مواد، متالورژی و ریخته گری ایران،۱۳۸۷ |
نیایی فر، بیت اللهی، ” تأثیر عملیات حرارتی بر تحولات فازی و خواص مغناطیسی نانوذرات سیستم Co/Fe۲O۳ سنتز شده به روش آلیاژسازی مکانیکی”، چهارمین همایش ملی عملیات حرارتی،۱۳۸۷ |
پیله وری، فقیهی ثانی، بیت اللهی، اکبر نژاد، ” سنتز نانوتیوب کربنی بر روی نانوکامپوزیت آلومینا-زیرکونیا”، مهندسی مواد، متالورژی و ریخته گری ایران،۱۳۸۷ |
حسینی بای ، بیت اللهی، سرپولکی، احمدی، ستوده، “سنتز نانوکامپوزیت آلومینا- زیرکونیا به روش شیمیائی سل – ژل اصلاح شده”، ششمین کنگره سرامیک ایران، ۱۳۸۶ |
میرکاظمی، مارقوسیان، بیت اللهی، رضائی، بهرامی، “بررسی اثر جوانه زایی اکسید کروم بر روی رفتار تبلور، ریزساختار و خواص مغناطیسی شیشه سرامیک سیستم BaO-Fe۲O۳-B۲O۳-SiO۲ “، ششمین کنگره سرامیک ایران، ۱۳۸۶ |
ثانی، بیت الهی، بافقی، “سنتز و بررسی خواص مغناطیسی فریت کبالت به روش فعالسازی مکانیکی”، ششمین کنگره سرامیک ایران، ۱۳۸۶ |
سالاری، بیت اللهی، مارقوسیان، “بررسی تأثیر افزودنی لانتانیم بر ریزساختار و خواص مغناطیسی هگزافریت کلسیم”، ششمین کنگره سرامیک ایران، ۱۳۸۶ |
سحر جعفری چم کاوی، بیت الهی، “سنتز شیمیائی و بررسی خواص مغناطیسی ذرات نانومتری مگنتیت حاوی مقادیر کم یون Zn۲+ به منظور استفاده در مقاصد پزشکی “، ششمین کنگره سرامیک ایران، ۱۳۸۶ |
علی نژاد، سرپولکی، بیت الهی، شهرآرا افشار، “سنتز شیمیائی اسپینل آلومینات منیزیم نانوساختار”، ششمین کنگره سرامیک ایران، ۱۳۸۶ |
شاهکویی، بیت اللهی، سرپولکی، حسینی، احمدی، ستوده، “تهیه نانوکامپوزیت آلومینا-زیرکونیا به روش سنتز احتراقی محلول با استفاده از سوخت اوره”، ششمین کنگره سرامیک ایران، ۱۳۸۶ |
بیت الهی، “نگاهی اجمالی به روند جهانی توسعه مواد نانوساختار، وضعیت فعلی و فرصت های کشور”، ششمین کنگره سرامیک ایران، ۱۳۸۶ |
مصدقی، طاهرخانی، حسینعلی پور، بیت اللهی، “کاربردهای خاص و نوین نانوذرات سوپر پارامغناطیس اکسید آهن مغناطیسی در تشخیص و درمان بیماریها”، کنفرانس فناوری نانو در محیط زیست، اصفهان، ۱۳۸۵ |
رضا غلامی پور، علی بیت اللهی، واهاک مارقوسیان، “تأثیر افزودنی Ge بر خواص مغناطیسی و ریزساختار آلیاژ نانوبلور Nd-Fe-Co-B “، دهمین کنگره سالانه انجمن متالورژی ایران، مشهد، ۱۳۸۵ |
سحر جعفری چم کاوی، علی بیت اللهی، “تأثیر شرایط سنتز به روش شیمیائی بر خواص مغناطیسی و فیزیکی ذرات نانومتری مگنتیت”، دهمین کنگره سالانه انجمن متالورژی ایران، مشهد، ۱۳۸۵ |
بی آزار، بیت اللهی، حسینعلی پور، رضایت، “بررسی تأثیر فرآیند فعالسازی مکانیکی در کاهش سایز ذرات داروی استامینوفن”، کنفرانس فناوری نانو در محیط زیست، اصفهان، ۱۳۸۵ |