دکتر مرتضی تمیزی فر

Jalaly, M., Bafghi, M.S.-S., Tamizifar, M., Gotor, F.J., “In situ synthesis of a ZrB 2 -based composite powder using a mechanochemical reaction for the zircon/magnesium/boron oxide/graphite system”, International Journal of Applied Ceramic Technology, Volume 12, Issue 3, 1 May 2015, Pages 551-559

M. Tamizifar , Preparation and morphological study of Epoxy/Silane Modified Nanoclay Nanocomposites, Asian Journal of Chemistry, (2009)

Kalantary, M. Tamizifar, Mechanical properties of Titanium centrifugal investment casting parts, Med. Center (2008)

Zhraii, Arabi, Salehy, M. Tamizifar, Development of Tungsten heavy alloy W-Ni-Mn used as kinetic energy penetrator, Iranian Journal of Materials Science and Engineering, (2008)

Hosseini, Arabi, M. Tamizifar , Ziaii , Effects of tensile strength of fatigue behavior and notch sensitivity of Ti-6Al-4V, Iranian Journal of Materials Science and Engineering, (2008)

B. Eftekhari, M. Tamizifar, N. Rahimi, “Synthesis of Zircon-cadmium sulfo selennide pigment by a sol-gel technique”, J. of the ceramic society of Japan, 2007, pp. 757-760

M. Tamizifar , investigating Optical features and structure of ZnO: Er Nano-layers prepared by Sol Gel Method, Journal of Science and Technology in color (2007)

Sh. Hosseini, H. Arabi, M. Tamizifar, A. Zeyaie , “Effect of tensile strength of fatigue behaviour and notch sensitivity of Ti-6Al-4V”, Iranian J. of material sci. & Eng., Vol. 4, 2006

R. Aghababazadeh, B. Mazinani, A. Mirhabibi, M. Tamizifar, “ZnO nanoparticles synthesized by mechanichemical processing”, Journal of Physics, Vol. 26, 2006, pp. 312-314

H. A. Akbarzadeh, M. Tamizifar, Sr. Mirdamadi , A. Abdolhossani , ” Mechanical properties and microstructures of Zr-microalloyed cast steel “, ISIJ Int. , Vol. 8, 2005, pp. 1201-1204

A. Mehryab, H. Arabi, M. Tamizifar, S. H. Seyedein, M. A. Razzazi, “Study of joining mechanism in brass/steel/brass sandwich materials prepared by scratch brushing method”, Iranian J. of materials Sci. and Eng., Vol. 1, 2005

A. Mehryab, H. Arabi, M. Tamizifar, S. H. Seyedein, “A study of bonding mechanism in a brass/steel/brass sheet composites”, Int. j. of Eng. Sci., Vol. 2, 2005

A. Mehryab, H. Arabi, M. Tamizifar, S. H. Seyedein, M. A. Razzazi, “Study of joining mechanism in brass/steel/brass sandwich materials prepared by scratch brushing method”, Iranian J. of materials Sci. and Eng. , Vol. 1, 2005

A. Mehryab, H. Arabi, M. Tamizifar, S. H. Seyedein, “A study of bonding mechanism in a brass/steel/brass sheet composites”, Int. j. of Eng. Sci., Vol. 2, 2005

Arabi, M. Tamizifar , Simin, A Study of bonding mechanism in a brass/steel/brass sheat composite, International Journal of Engineering Science (۲۰۰۳)

M. Tmizifar, Sharafy, Yasreby, Salehpour, Low-power ultrasound wave effects on the growth bone inside the titanium implant channel , Science and research journal, Medicine , (2003)

 M. Tamizifar , Yazdanbakhsh, Causes of failure and long-term relaxation of fully Hip prostheses, new spine (2002)

 M. Tamizifar , Kalantary, Salehpour, Mechanical properties of precision castings assemblies via vacuum centrifugal for pure titanium alloy , International Journal of Engineering Science (2000)

M. Tamizifar, Khast, Investigating mechanical properties of natural cement before and after adding natural and artificial alloy, Cement Journal (1999)

M.Tamizifar , Shokuhfar, Ebrahimi, Evaluation and production of parts from WC powder via powder metallurgy , Research (1993)

M. Tamizifar , Usage of modified nano-clay in removing hydrocarbon pollutants from the water environment, ۷^th Congress of ceramic (2009)

M. Tamizifar , Preparation and morphological study of Epoxy/Silane modified nanoclay nanocomposite, 1 st NANO TODAY CONFERENCE (2009)

M. Tamizifar , The effect of ZnO percent on corrosion properties of metallic magnets NdFeB connection field produced by magnetic particles coating, corrosion National Congress (2009)

 M.Tamizifar , Effect of electrical current intensity on coating properties of composite hydroxyapatite/Ti, 10^th national seminar on engineering level, corrosion National Congress (2009)

M. Tamizifar , Preparation and study the microstructure of nano-clay used in nano-composite polymer, 7^th Congress of ceramic (2009)

M. Tamizifar , Identification and synthesis of Na-Y zeolite from domestic materials and Iranian Kaolin, the Seventh Congress of ceramic, the Seventh Congress of ceramic, 7^th Congress of ceramic (2009)

M. Tamizifar , Preparation and investigation of morphology of PAN well-alinged carbon nano-fibers prepared by electro-spinning, 7^th Congress of ceramic (2009)

M. Tamizifar , microstructure analysis of hard metal alloy influenced by boron carbide growth inhibitors, Joint Conference Seminar of 19^th Casting Society of Academic and Annual Congress of Metallurgical and Materials Engineers (2007)

M. Tamizifar , Computer simulation of the first phase of the process of iso-static cold pressing powder, The 6th conference of ceramic, Materials and Energy Research (2007)

M. Tamizifar , effect of accumulation of metal nano-layer method coated by magnetron sputtering on the infrared reflectance of glass flute, 8th Conference on Condensed materials, Physics Society of Iran (2007)

H. Kalantari-M. Tamizifar , “Mechanical properties of Titanium centrifugal investment casting parts”, Rocky mountain bioengineering symposium, Mississippi, 2006

Sh. Hosseini, H. Arabi, M. Tamizifar, A. Zeyaie , “Effect of tensile strength of fatigue behaviour and notch sensitibity of Ti-6Al-4V”, Iranian J. of material sci. & eng., Vol. 4, 2005

M.Tamizifar , Salehpour, H.H. aboutaleby, Nitrogen ion implantation on Ti-6Al-4V surface and study the phase and surface properties, First International Conference of Color Science and Technology, Industrial Institute of Iran Color Research (2005)

Karbalaii sabbagh, serajan, M.Tamizifar , Heat annealing study of Biomedical Ti-6Al-4V alloy surface after operation TIG , National Conferen ce on Heat Treatment , Islamic Azad University ,Shahre majlesi branch (2005)

Talatary, M.Tamizifar , Rastegary, Corrosion Behavior Ti_۶Al_۷Nb and Ti_۶Al_۴V alloys in physiologic body solutions in different situations, 8^th annual congress of Iranian Metallurgical Engineers Society, Isfahan University of technology (2004)

Serajan, M. Tamizifar , Karbalaii sabbagh, Effect of TIG operation on Anodizing behavior of Biomedical Ti-6Al-4V, Fifth National Conference on Materials and Metallurgy, Islamic Azad University , Yazd branch (2004)

Akbarzadeh, M.Tamizifar , Mirdamady, Mechanical properties and microstructure of micro-alloy cast steel containing zirconium, 4^th Congress of Metallurgy and Materials Engineering, Islamic Azad University, Science and Research branch (2003)

Moghaddam , M.Tamizifar, Khorsand, habibi , Mechanical properties of powder metallurgy steel Ultrapac LA , Scientific Symposium Materials and Metallurgical Engineering, Sahand University in Tabriz (2002)

Salehpour , M.Tamizifar, Pirayeshnia, Effect of temperature on the velocity sedimentation method of CVD TiN on WC particles, The first specialized seminar on mineral pigments and ceramic coatings , Iran Science and technology university (۲۰۰۱)

Salehpour, M.Tamizifar , Mohammdzadeh, Investigating strength and common surface area of nickel based dental alloys (PFM) with porcelain ceramic type 2 , Sixth Annual Congress of Metallurgical Engineers, Iran Science and technology university (2001)

Mehryab , M .Tamizifar , ghamary , Adeli , Connection strength of brass on steel using Cladding process, The first conference of metal forming, Sharif University of technology (2001)

Rajaii, M.Tamizifar , Khorramimehr, Stress analysis on the bone around fine different dental implants, 23rd Annual int.conf of the IEEE Eng. In medicine & Biologies Science (2001)

Omidvar, M.Tamizifar , Salehy, Salehpour, Khoshkalam, Effect of thermo mechanical operation (temperature, speed, percentage of strain) on the morphology of alpha phase in Ti-6Al-4V alloy , The first conference of science and application of aerospace industries, Malek ashtar university of technology (2000)

M. Tamizifar, Salehpour , Evaluation on microstructure and hardness of titanium dental implants , 9^th conference of medical engineering, Iran Science and technology university (1999)

Nadery, Momeni, M. Tamizifar , Dissociation and rounding analysis Δ -ferrite within austenitic CF-3M stainless steel through precise casting process, The second symposium of Iranian metallurgy engineers, Sharif university of technology (1998)

Khodabakhshy , M. Tamizifar, Spherical amalgam alloy powder production method and investigating the effect of atomizing gas processing variables on the morphology and particle size powder , ۸^th conference of medical engineering, Amirkabir University of technology (1996)

Ebrahimifar, M.Tamizifar , Effect of loading temperature and post heat treatment on the planning structure and properties of manganese austenitic steel , Steel symposium 75, Isfahan university of technology (1996)

Ebrahimifar, M.Tamizifar , study and production of tungsten carbide based hard metals through Powder Metallurgy, The second conference of ceramic, Iran Science and Technology University (1994)